AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 72)

Telephoning
70
LCR off:* You switch off LCR (Least Cost Routing) for the next call.
Menu during Conversation
Note
Menu items marked with an * are only displayed if the system administrator has
given corresponding user authorisation.
You are making a call. Press the softkey briefly and then dial …
Intercept:* The call numbers of “malicious callers” can be saved in your network
operator’s exchange (if this service is enabled). The function is also possible if
the caller has already hung up!
Disconnect: The connection is disconnected. The current call is ended and you can
dial once again.
Take: You wish to take a current call from one terminal over to your DECT telephone
and continue the call on the DECT telephone. To do so, your DECT telephone
and the other terminal must have the same internal call number. Your first call
is put on hold.
Pick-up:* You pick up the call intended for another telephone in your pick-up group.
Your first call is put on hold. “Pick-up” is not available if there are two connec-
tions running already.
Pick-up select:* You pick up a call for any other internal subscriber. Enter the call
number of the other telephone. If the other telephone is already in the call
state (e.g. an answering machine is making an announcement), you pick up the
call. “Pick-up select” is not available if there are two connections running
already. The subscriber for whom you picked up the call must belong to a user
group for which “Call removal” authorisation is activated, otherwise “Pick-up
select” is not possible.
Note: If the called subscriber is a member of a user group for which pick-up
protection is active, “Pick-up” and “Pick-up select” are not possible.
Booking number:* You can assign a booking number to the current call (to an
external subscriber). Enter the booking number (8 digits max.) under No. and
confirm with the Ok softkey. Please refer to the Calls with Booking Numbers
starting on page 59 chapter for further information.