AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 87)

Telephoning
85
Parked Calls
While calling, you can “park” (one or more) callers for some time and meanwhile
conduct other telephone calls or also hang up and carry out other operations. Parked
calls are recorded on a list. You can remove calls from the list in any order such that a
call is specifically “unparked” once again. The caller hears music on hold – if music on
hold has been configured – until the call is “unparked”. If the caller is not “unparked”
after some time, a callback is automatically made to your mobile unit as soon as your
device is free again. The caller is then automatically “unparked”. If you are, however,
still on another call, the caller hears the busy signal and is thus “unparked”. The
authorisation for parking connections and the time interval until which callback takes
place, is configured by the system administrator upon system configuration.
Park call
You are making a call.
Press softkey.
/ Use the navigation keys to select the Park call menu entry and
confirm with the Ok softkey. The system offers the next available
parking spot (0-9, * or #). Confirm with the Ok softkey.
Press the end key.
Unpark call
Press softkey when idle.
/ Use the navigation keys to select the Unpark menu entry and confirm
with the Ok softkey. Select the parked call desired from the list offered.
Confirm with the Ok softkey.
You will be connected with the parked caller.