AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 50)

Basic Functions
48
End call
Press the corresponding “end-call key” on the headset or the
end-call key on
the mobile unit.
Outgoing call
Enter the call number on the mobile unit and press the corresponding “call key” on
the headset or the
call key on the mobile unit.
Handsfree operation
When you press the
handsfree key to accept a call or during a call, Bluetooth oper-
ation is interrupted and the loudspeaker / microphone of the mobile unit is switched
on.
Transferring call to headset
During a connection via the mobile unit: press the “call key” on the headset.
Transferring call to mobile unit
During a connection via the headset: press
and select Transfer BT to Handset.
Special Key (Hotkey) / VIP List (Aastra 620d/630d)
The special key (hotkey) on the upper right side of the Aastra 620d and Aastra 630d
mobile units is prepared as the VIP directory / VIP list as the default for saving up to six
especially fast-access telephone numbers (the key can be re-programmed, please
refer to the chapter entitled Key Programming starting on page 137).
Programming call numbers
To programme your preferred call numbers, press the hotkey briefly and then the New
softkey. Enter the name and call number. Define additional call numbers under the
> New entry option.
Dialling a call number
To dial this call number, press the hotkey briefly, select the desired entry and press the
call key; the call is made.
Calls from call numbers on the VIP list are signalled by the VIP call. This setting is made
in the
> Audio > Ringer settings > Melodies menu (see page 110).