AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 81)

Telephoning
79
Transferring an External Call to an External Subscriber
External calls can only be transferred to an external subscriber via the enquiry call
menu (see page 79).
Depending on your communications system’s settings, the external calls will be
switched together on your communications system or on the exchange of your
network operator.
Note
When you call an external party and then transfer this person to another external
party, you will bear the costs for the call between the two external callers. You have
no way of influencing how long the transferred call will last. The connection is estab-
lished via the Aastra 800 / OpenCom 100 and occupies two call channels (ISDN user
channels).
Enquiry Call Menu
Note
Menu items marked with an * are only displayed if the system administrator has
given corresponding user authorisation.
You have put a call on hold and are making an enquiry call. Press the softkey
briefly and then dial …
Diversion: You put your current caller on hold (called via enquriy) and then call
another (third) subscriber with whom you wish to connect your current
(second) caller. Enter the call number of the subscriber to whom you wish to
transfer under Dest: and then press the Ok softkey. Announce the call and
press the
end key. The call has now been transferred. After transfer, you
are reconnected with the (first) caller you originally put on hold.
3 party:* You initiate a 3-party conference, see page 82.
Press softkey briefly.
/ Use the navigation keys to select the Connect menu entry and
confirm with the Ok softkey.