AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 77)

Telephoning
75
Incoming Call Menu
You receive an incoming call, the telephone is in the idle state. Press the softkey
briefly and then dial …
Accept: You accept the call.
Reject: Reject the call by pressing the Ok softkey. The caller hears the busy signal.
Ringer off: Switch call signalling (ringer and/or vibration alarm) off temporarily. You
can still accept the call.
Deflect call: You do not accept the call yourself, rather deflect it to another subscriber.
Enter the call number of this subscriber under Dest: and then the Ok softkey.
You can only use the “Deflect call” function if your user group has the authori-
sation to deflect internal and/or external destinations.
Note: If you receive a call via a call forwarding chain and wish to deflect it to a
destination call number which is already in the call forwarding chain, a neg-
ative acknowledgement tone is heard and the call signalling on your device
will continue.
Add …: The call number of the subscriber calling is added to the personal phone
book or the VIP list.
Door opener: You activate the door opener (this menu entry is available to you with
the appropriate user authorisation).
… or
Press softkey briefly to accept the call waiting call. Your first call is
placed on hold. You are speaking with the call waiting caller.
For further information, please refer to the Enquiry, Toggling, Transfer
and Conference starting on page 77 chapter.
… or
Press softkey briefly and select one of the menu entries offered, please
refer to Call Waiting Menu starting on page 76.