AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 80)

Telephoning
78
Transferring an Internal/External Call to an Internal Subscriber
You have dialled an internal enquriy call (see page 77).
If the called subscriber accepts the call, he/she will be connected to the waiting call. If
the call is not accepted within a certain time interval (the communications system is
45 seconds by default, the system administrator can change this value), you get an
automatic recall. You are re-connected to the original subscriber when you press the
call key again.
If the system administrator has configured the Music on hold upon transfer on
calling feature in the Configurator, the caller on hold hears “Music on Hold” while
his/her call is signalled to the other internal subscriber. This setting also determines
whether, when calling back, the caller hears “Music on Hold” or a ringing tone or busy
signal.
The subscriber called via enquiry answers:
Announce the call transfer.
Press softkey briefly.
The subscriber called via enquiry does not answer or is busy:
Press softkey briefly. The other subscriber is called.
Use the following procedure to disconnect an enquiry connection (e. g. when the
subscriber called is busy):
Press softkey briefly.
/ Use the navigation keys to select the Disconnect menu entry and
confirm with the Ok softkey.
Enter another call number to transfer the call.
… or
Press R key briefly. You are speaking with the waiting subscriber once
again.