AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 19)

Installation
17
Aastra 630d : Removing the Cover
The opening of the headset socket is closed with an undetachable cover. If a headset
is not used, please be sure to close the opening to be sure the device can be operated
in accordance with its protection class.
Remove the cover by tugging it out of the housing on the upper edge.
Never tug it out on the lower edge!
USB and External Charging Port
Aastra 620d, Aastra 630d: There is a mini USB port (2.0) on the lower right side. It has
two functions:
• As an interface for connecting to the PC e.g. to load data to/from the device. When
the mobile unit is connected to a PC it is charged simultaneously. The charging
process is slower, however, than when the mobile unit is charged in the charger.
• As a connection socket for a USB charger (see Accessories starting on page 145),
e.g. to charge the mobile unit even when it is in a leather pouch. This charging
process is also slower than when charging in the charger.
Use a shielded “USB 2.0 A to USB mini B” type USB cable only.
Aastra 630d – USB Port: Removing the Cover
The opening of the USB port is closed with an undetachable cover. If a USB cable is
not used, please be sure to close the opening to be sure the device can be operated in
accordance with its protection class. Remove the cover by tugging it out of the
housing on the upper edge.
Never tug it out on the lower edge!