AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 51)

Basic Functions
49
Note
The VIP list can also be programmed with call numbers in the Directories menu (see
page 107).
VIP List (Aastra 610d)
The Aastra 610d programmable keys can also be assigned with a VIP directory. To do
so, programme one of these keys as described on page 137 and then save the name
and call number as described in the previous section (or in the Directories menu).
Profiles
Profiles are a group of mobile unit settings which are respectively assigned to a spe-
cific situation or application. So you can, e.g. switch from the Normal operation mode
(e.g. in an office) to the Loud operation mode when you move into a different envi-
ronment (e.g. workshop). Switching profiles adjusts various features to the envi-
ronment, e.g. ring tone volume, vibra call, voice quality, LED signalling etc.
Your mobile unit has 5 profiles. These are pre-defined but can be changed at anytime.
Change the default settings as needed in accordance with your requirements (see
page 135).
Note
When you change features contained by the profile with the profile activated via the
usual menu access (e.g. via the
> Audio > Volume settings > Ringer menu),
these settings are taken on by the respective profile.
Adjusting to Environment
Your mobile unit has 2 functions for adjusting the device to a loud environment:
When you activate the function via the > Audio > Ringer settings > Volume
menu, the volume of the ring tone is automatically increased when the environment
is loud.
Please note that in this case the ring tone volume should not be set to Increasing.