AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 111)

The Device Menu
109
Time: Displays time set for the alarm clock.
Edit: Changes time setting.
Text: Displays text entered for the alarm clock.
Edit: Change/re-enter the text (32 characters max.).
Note: If the ringer is switched off (see page 111), there is no acoustical signal
for the alarm clock set.
A wake-up call which is already being signalled can be interrupted for
5 minutes at a time, as described on page 44 with Snooze. When opening an
alarm which has been paused, Stop (to switch off ) and Snooze (to continue
interrupting the signal) appear.
Timer: options for setting a timer which counts backwards (max. 23 hours / 59
minutes). The respectively remaining time until signalling (beeps increasing in
volume) is shown on the display. The ring tone of the timer cannot be con-
figured.
Format settings: For configuring date and time display format.
Time format: Changes the time format (24h or 12h am/pm)
Date format: Changes the date format.
DD.MM.YY for, e.g. 10.04.09
DD.MM.YY for, e.g. 04/10/09
DD.MM.YY for, e.g. 09-04-10
DD.MM.YY for, e.g. 09-04-10
“Audio” Menu
Volume settings: For changing the following settings, use the and navigation
keys or enter a number (1 … 7).
Earpiece: Displays the currently set earpiece volume.
Handsfree: Displays the currently set volume for handsfree mode.
Corded headset: Displays the currently set headset volume (not applicable to
Bluetooth headset).
Ringer: Displays the currently set earpiece volume.
Ringer settings: Ringer settings.