AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 16)

Installation
14
Installation
Scope of Delivery
This package includes:
• a mobile unit (Aastra 610d, Aastra 620d or Aastra 630d)
• a charger
• one power supply (ID No.: 23-001061-00)
• a standard battery
• a belt clip
• short user guide
Inserting Standard Battery
Aastra 610d, Aastra 620d
Slide the battery compartment lid down until
the catch releases, then lift it. Insert the battery
with the contacts pointing down. Place the
battery compartment lid on the unit and slide
it upwards until it clicks into place.
Aastra 630d
Loosen the two screws on the rear side of the
mobile unit with a suitable tool and remove
the lid. Insert the battery with the contacts
pointing downwards, close the battery com-
partment with the lid (insert lower down, press
upwards) and screw it shut again. Do not
damage the rubber seal when putting it back
together.