AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 17)

Installation
15
Inserting the Power Battery
Mounting / Removing a Bracket or Swivel Clip
You can order a battery with greater charge
capacity (power battery) as an accessory (see
page 145) for Aastra 620d and Aastra 630d. It
is thicker which means you need a different
battery compartment lid which protrudes ca.
6 mm on the rear side of the device.
Mount the new battery compartment lid as
described above. You should first remove any
bracket if mounted on the Aastra 620d and
Aastra 630d.
Aastra 610d, Aastra 620d
The bracket that comes with the product is
placed on the two openings at the upper end
of the mobile unit and snapped into place by
pressing on it. To remove the bracket, press in
the little recesses of the edge of the bracket
and pull the bracket apart somewhat.
A swivel clip can also be provided as an
accessory for the Aastra 610d and
Aastra 620d. The bracket is also placed on the
two openings at the upper end of the mobile
unit and snapped into place by pressing on it.
Then the clip is pushed on the protruding
button. Press the upper button to release the
moveable part of the clip.