Xylem 10 001 262R5 AquaForce Pump Controller - Manual (Page 48)

AQUAFORCE Installation, Operation, and Maintenance 42
6.11 Field Repair
6.11.0 General
Typical field repair should include: replacing fuses, replacing input/output modules and assuring connections are
correct and secure.
DANGER:
• Troubleshooting live control panels exposes personnel to hazardous voltages. Electrical troubleshooting
must only be done by a qualified electrician. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD
RESULT IN SERIOUS PERSONAL INJURY, DEATH, AND/OR PROPERTY DAMAGE.
6.12 Program updating
To update to a new version of the program the program must be downloaded through the RS-232 port on the
CPU. This can be accomplished by one of the following means:
To update to a new version of the program the program must be downloaded through the RS-232 port on the
controller. This can be accomplished by one of the following means:
1) A factory authorized technician uploads on job site.
2) Replace the controller with one that has been pre-programmed at the factory.
Contact your Goulds Pumps representative for the preferred method of upgrading your software.
Maintenance