Xylem 10 001 262R5 AquaForce Pump Controller - Manual (Page 51)

AQUAFORCE Installation, Operation, and Maintenance 45
Maintenance
6.14.3 Pump log
Paths: Status Screens / Log(5) / Pump Log (2) / Pump Log(1)
The display now shows:
MMDD HHMM
PUMP ON/OFF MESSAGE
MMDD HHMM PUMP ON/OFF MESSAGE
MMDD HHMM PUMP ON/OFF MESSAGE
MMDD HHMM PUMP ON/OFF MESSAGE
Every pump ON/OFF occurrence will be logged along with the date and time. The forty most recent
occurrences will be stored. The date is displayed in MMDD format and the time is displayed in HHMM format.
The most recent occurrence is shown first. Press NEXT/( ) and PREV/( ) view more log events. Press
CLEAR to exit.
6.14.4 Pump run time
Paths: Status Screens / Log(5) / Pump Log (2) / Pump Run Time(2)
The display now shows:
Pump Run Time
P1:
# P2: #
P3: # P4: #
The pump run time is displayed in total accumulated elapsed time in hours
6.14.5 Pump on/off times
Paths: Status Screens / Log(5) / Pump Log (2) / Pump On Off Times(3)
The display now shows:
Pump On/Off
P1:
# P2: #
P3: # P4: #
The pump on/off times are displayed in total accumulated times the pumps are switched on and off.
6.14.6 Data log
Paths: Status Screens / Log(5) / Data Log(3)
The display now shows:
Selection: # 0=Exit
1=Sensor
2= Totalized Value
Use the appropriate numeric key to select the desired sub-menu, then press the
ENTER key. A detailed
description of each sub-menu appears.
6.14.7 Sensor
Paths: Status Screens / Log(5) / Data Log(3) / Sensor(1)
The display now shows:
<SENSOR TYPE MAX: # >
MM/DD/YY
00:00:00
NOW: # MIN: #
MM/DD/YY 00:00:00
The sensor type is displayed along with its current, maximum, minimum values. The times and dates that the max
and min values occurred are also displayed. To view other sensors, press the Next Screen button.
Press
PV/1 and ENTER keys together to reset the max value.
Press SET PT/2 and ENTER keys together to reset the min value.
▲
▲