Xylem 10 001 262R5 AquaForce Pump Controller - Manual (Page 53)

AQUAFORCE Installation, Operation, and Maintenance 47
Maintenance
6.14.12 Events
Paths: Status Screens / Log(5) / Operation(4) / Events(3)
The display now shows:
Selection: # 0=Exit
1=System On/Off
2=Alternation
3= Sys Rset 4=Events
Use the appropriate numeric key to select the desired sub-menu, then press the
ENTER key. A detailed
description of each sub-menu appears.
6.14.13 System on/off
Paths: Status Screens / Log(5) / Operation(4) / Events(3) / System On Off(1)
The display now shows:
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
MMDD HHMM Start/Stop
Every time the
START/STOP key is pressed, the event will be logged by showing the system start/stop state.
The forty most recent logs will be stored. The date is displayed in MMDD format and the time in 24 hour
HHMM format. The most recent event will be shown first. Press NEXT/( ) and PREV/( ) to view more
log events. Press CLEAR to exit.
6.14.14 Alternation
Paths: Status Screens / Log(5) / Operation(4) / Events(3) / Alternation(2)
The display now shows:
MMDD HHMM Seq#
MMDD HHMM Seq#
MMDD HHMM Seq#
MMDD HHMM Seq#
Every time the pump sequence is changed, the event will be logged by showing the sequence. The forty most
recent logs will be stored. The date is displayed in MMDD format and the time in 24 hour HHMM format. The
most recent event will be shown first. Press NEXT/( ) and PREV/( ) to view more log events.
Press CLEAR to exit.
6.14.15 Sys Rset
Paths: Status Screens / Log(5) / Operation(4) / Events(3) / Sys Rset(3)
The display now shows:
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
MMDD HHMM Sys Reset Message
Every time the system is reset, the event will be logged by showing the system reset. The forty most recent logs
will be stored. The date is displayed in MMDD format and the time in 24 hour HHMM format. The most recent
event will be shown first. Press NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.
▲
▲
▲
▲
▲
▲