Xylem 10 001 262R5 AquaForce Pump Controller - Manual (Page 54)

AQUAFORCE Installation, Operation, and Maintenance 48
Maintenance
6.14.16 Events
Paths: Status Screens / Log(5) / Operation(4) / Events(3) / Events(4)
The display now shows:
MMDD HHMM Event Message
MMDD HHMM Event Message
MMDD HHMM Event Message
MMDD HHMM Event Message
Every time an event occurs, it gets logged. The forty most recent logs will be stored. The date is displayed
in MMDD format and the time in 24 hour HHMM format. The most recent event will be shown first.
Press NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.
6.14.17 VFD
Paths: Status Screens / Log(5) / Operation(4) / VFD(4)
The display now shows:
MMDD HHMM VFD Failure Message
MMDD HHMM VFD Failure Message
MMDD HHMM VFD Failure Message
MMDD HHMM VFD Failure Message
Every time VFD failure occurs, it gets logged. The forty most recent logs will be stored. The date is displayed
in MMDD format and the time in 24 hour HHMM format. The most recent event will be shown first.
Press NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.
6.14.18 Exercise
Paths: Status Screens / Log(5) / Operation(4) / Exercise(5)
The display now shows:
MMDD HHMM Pump #
MMDD HHMM Pump #
MMDD HHMM Pump #
MMDD HHMM Pump #
Every time a pump is exercised, it gets logged. The forty most recent logs will be stored. The date is displayed
in MMDD format and the time in 24 hour HHMM format. The most recent event will be shown first.
Press NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.
6.14.19 Set Point
Paths: Status Screens / Log(5) / Operation(4) / Set Point(6)
The display now shows:
MMDD HHYY Set point change message
MMDD HHYY Set point change message
MMDD HHYY Set point change message
MMDD HHYY Set point change message
Every time setpoint change, it gets logged. The forty most reset logs will be stored. the date is displayed
in MMDD format and the time in 24 hour HHMM format. The most resent event will be shown first.
Press NEXT/( ) and PREV/( ) to view more log events. Press CLEAR to exit.
▲
▲
▲
▲
▲
▲
▲
▲