Xylem photoLab 6100 VIS - Manual (Page 106)

Operation photoLab
®
6100 VIS
106 ba75847e01 08/2009
4.11.5 Saving measurement datasets automatically
For the measuring modes, Concentration, Absorbance / % Transmission,
and Multi wavelengths you can record every measured value automatically
(AutoStore).
All automatically stored measurement datasets are given the ID "AutoStore".
The "AutoStore" ID is overwritten if the same measured value is manually
stored afterwards (<STORE>).
This ensures that every measurement dataset is stored in the data memory
only once.
Activating
AutoStore Activate the AutoStore function as follows:
Note
The AutoStore setting is valid for all three measuring modes, Concentration,
Absorbance / % Transmission, and Multi wavelengths.
The available functions are
displayed.
1 Select and confirm AutoStore.
The AutoStore function is active
( ).
<HOME>
Concentration,
Absorbance / % Transmission, or
Multi wavelengths
– [Setup]
– Measurement data
memory
– Setup