Xylem photoLab 6100 VIS - Manual (Page 113)

photoLab
®
6100 VIS Operation
113 ba75847e01 08/2009
Example:
Saving data from the
measured value
memory
1 If necessary, set the filter criteria
with [Setup].
2 Open the save dialog with
<STORE>.
The photometer automatically
proposes the location Internal
DataB folder
and a file name.
3 If necessary, change the location
with [Location] (USB memory).
4 If necessary, change the
proposed file name.
5 Save the measurement data with
<STORE>.
The data are stored.
If the photometer (Internal DataB
folder) is selected as the location,
the data can then be copied to a
USB memory device (see section
4.12.2).
<HOME>
Concentration,
Absorbance / % Transmission, or
Multi wavelengths
– [Setup]
– Measurement data
memory
Save (Internal DataB folder) 04/16/07 9:52
Location
MData_1.csv