Xylem photoLab 6100 VIS - Manual (Page 146)

Operation photoLab
®
6100 VIS
146 ba75847e01 08/2009
4.19 Software and methods update
The software and method update is used to continuously update your
photometer.
Note
Only users of the user group, Administrator are allowed to carry out a
software and method update.
The update comprises
z the newest firmware (meter software)
z new or changed method data
Note
User-defined data (such as settings, user-defined methods or measured
data) are not changed by a software and methods update.
The current software version is available on the Internet under http://
www.WTW.com.
The software can be transmitted to the photometer as follows:
z by means of a USB memory device as a temporary storage
(section 4.19.1).
z by means of a USB connection between a PC and the photometer
(section 4.19.2).
4.19.1 Update by means of a USB memory device
Store the new software required for the update on the USB memory device
and connect it to the photometer.
Execution 1 Connect the USB memory device
to the PC.
2 Unpack the contents of the
downloaded exe or zip file with the
complete folder structure in the
main directory (top level) of the
USB memory device.