Xylem photoLab 6100 VIS - Manual (Page 110)

Operation photoLab
®
6100 VIS
110 ba75847e01 08/2009
Note
Alternatively, you can hide measurement datasets that meet the specified
filter criteria with the Selected values: invert selection function (see section
4.11.8).
4.11.8 Inverting filters
With the Selected values: invert selection function you can hide all
measurement datasets that correspond to the specified criteria of the filter
(see section 4.11.7).
Note
You can use this function to select and delete measurement datasets no
longer used.
The Measurement data memory
list is displayed. All measurement
datasets corresponding to the
filter criteria are hidden.
<HOME>
Concentration,
Absorbance / % Transmission, or
Multi wavelengths
– [Setup]
– Measurement data
memory
– Setup
– Selected values:
invert selection
Measurement data memory 04/16/07 9:52
27.03.07 14:00 3.50 mg/l Ni Administrator AutoStore
27.03.07 14:05 3.64 mg/l Ni Administrator AutoStore
27.03.07 14:10 3.69 mg/l Ni Administrator AutoStore
27.03.07 14:15 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:20 3.72 mg/l Ni Administrator AutoStore
27.03.07 14:25 3.75 mg/l Ni Administrator AutoStore
27.03.07 14:30 3.73 mg/l Ni Administrator AutoStore
27.03.07 14:35 3.80 mg/l Ni Administrator AutoStore
27.03.07 14:40 3.78 mg/l Ni Administrator AutoStore
Filter
Memory allocation: 9/1000
Setup Single value Delete