4 saving / exporting a kinetic record, Saving / exporting a kinetic record – Xylem photoLab 6100 VIS User Manual
Page 95
photoLab
®
6100 VIS
Operation
95
ba75847e01
08/2009
4.9.4
Saving / exporting a kinetic record
Saving
Export to a PC
Export a stored kinetic record to a PC: see section 4.12.3
1
Carry out the kinetic recording
(see section 4.9.3)
or
Load a stored kinetic record (see
section 4.9.4).
2
If necessary, connect a USB
memory device to the USB-A
interface.
3
Open the save dialog with
<STORE>.
4
If necessary, change the storage
location with [Location]:
Internal DataB folder:
Exchange folder in the instrument
or
USB memory:
USB memory device connected at
the USB-A connection.
5
If necessary, change the file
name.
6
Save the file with
<START·ENTER>.
Kinetics
04/16/07 9:52
4002
Number of measurements: 4
Duration: 00:00:24
Interval:00:00:06
Time [s]
Setup
Profile
Edit
Open
Setup
Profile
Slope
Open
Ab
so
rb
an
ce