Xylem photoLab 6100 VIS User Manual
Page 39
Advertising
photoLab
®
6100 VIS
Operation
39
ba75847e01
08/2009
Rectangular cell:
Open the inner turn-up lid.
Insert the rectangular cell
vertically so it touches the bottom
and left edge of the cell shaft. The
opaque sides of the rectangular
cell must point to the front and
back.
The photometer has an external
light recognition. If there is too
much external light, a message
prompts you to close the cell shaft
cover.
The photometer automatically
starts the zero adjustment and
subsequently stores the value.
5
After a successful zero adjustment
switch to measurement with [OK].
Zero cell
(H O dist.)
2
Zero adjustment
04/16/07 9:52
Zero adjustment successful
10 mm
OK
Advertising