Xylem photoLab 6100 VIS - Manual (Page 91)

photoLab
®
6100 VIS Operation
91 ba75847e01 08/2009
4.9.2 Loading a profile for kinetic recording
To load a profile for kinetic recording, proceed as follows:
Narrowing down the
list of profiles
If the list is very long, you can narrow down the profile list and thus make the
search easier as follows:
z Using [Last used], you can restrict the profile list to the ten profiles last
used.
z With the search function you can search certain character strings in the
list. The search takes place as a full-text search of the entire list contents.
Thus you can search for a profile number or name.
Search function
Note
Note the case sensitivity when searching.
The list of profiles is displayed.
The profiles are ordered according
to the profile number.
Selecting a profile:
1 Select the required profile with
<
▲><▼>. The active selection is
displayed in reverse video.
2 Accept the selection with
<START·ENTER>.
The photometer is ready to
measure.
<HOME>
Kinetics
– [Profile]
Select profile (all) 04/16/07 9:52
4001 NADH Absorbance
4002 ADH Absorbance
Last used
Search for a character string:
Enter the character string to be
searched for in the search window
with <A...9>.
The list appearing below shows all
hits containing the character
string. The hit list is updated with
each character that is entered.
Select profile (last used) 04/16/07 9:52
4001 NADH Absorbance
All profiles
NA_