Xylem photoLab 6100 VIS - Manual (Page 51)

photoLab
®
6100 VIS Operation
51 ba75847e01 08/2009
The entered value for the dilution factor is valid for the selected method only.
The dilution factor is erased if
z the photometer is switched off
z a different method is selected
z the factor 0 is entered in the Dilution menu.
If a dilution factor is active, it is indicated on the display during measurement
in the form [1 + x].
1 Open the setting menu with
[Setup].
2 Select and confirm Dilution.
The input field for the dilution pops
up.
3 Enter and confirm the dilution
(<0...9>).
The entered dilution is taken into
account with the next
measurement.
Concentration 04/16/07 9:52
3: A6/25 NH
4
-N
16 mm 0.20 - 8.00 mg/l
Setup Method list Citation form Unit
Sample + distilled water
1 + _