B&K Precision 4079 - Manual - Manual (Page 21)

15
o PROT
 FROM
 TO
 ALL
 ON | OFF
 PREV
o SHOW WAVE
o PREV
• PREV
 PREV
- MODE
o CONT
o TRIG
 MAN (Manual Trigger)
 INT (Internal Trigger Rate)
 EXT (External Trigger)
 PREV
o GATE
 MAN (Manual Gate Trigger)
 INT (Internal Gate Trigger Rate)
 EXT (External Gate Trigger)
 PREV
o BURST
 MAN (Manual Burst)
 INT (Internal Burst Rate)
 EXT (Burst External)
 NBRST (Number of Bursts)
 PREV
o PHASE (Not available in ARB mode)
 PHASE (Set Phase Degree)
 SET-ZERO (Set Phase to 0)
 PREV
- SWEEP ( Not Available in PULSE and ARB mode)
o ON | OFF
o START (Sweep Start Frequency)
o STOP (Sweep Stop Frequency)
o RATE (Sweep Rate)
o LIN | LOG (Linear or Logarithmic)
- MODUL
o AM
 ON | OFF
 % (% of Modulation)
 SHAPE (AM Modulation Shape)
 MOD FREQ (AM Modulation Frequency)
 EXT | INT (External or Internal Modulation)
o FM (Not available in PULSE and ARB mode)
 ON | OFF
 DEV (FM Deviation Frequency)
 SHAPE (FM Modulation Shape)
 MOD FREQ (FM Modulation Frequency)
 EXT | INT (External or Internal Modulation)
o FSK (Not available in PULSE and ARB mode)
 ON | OFF
 F-LO (FSK Low Frequency)
 F-HI (FSK High Frequency)
 RATE (FSK Rate)
 EXT | INT (External or Internal modulation)
- SETUPS
o RECALL (Recall Setup from Memory)
o STORE (Store Setup from Memory)
o SAVE ARB (Saves current arbitrary waveform into memory. Available only in ARB mode)
- UTIL
o GPIB (ACTIVE) (GPIB Address)
o RS232 (ACTIVE) (Baudrate)
o INTEN
o POWER (Power On Setup)
o SUM ON | OFF