B&K Precision 4079 - Manual - Manual (Page 28)

22
abort executing the predefined waveform; press YES to execute the predefined waveform. On the NOISE
function a menu of ADD and NEW is prompted to select a new noise waveform or to add noise to the
existing waveform.
F4: MORE - Displays the following Menu:
F1: COPY - Displays the Copy menu (see the Copy Function later in this section).
F2: CLEAR - Displays the Clear menu (see the Clear Function later in this section).
F3: PROT - Displays the Protect menu (see the Protect Function later in this section).
F4: SHOW WAVE - Display the Arbitrary waveform in full screen mode on LCD display. This is only an
approximated display for quick viewing. It does not represent the exact waveform
being generated. To return back to the MENU selection, press any button.
Full Display Example
F5: PREV - Returns to previous menu.
Copy Function. Copies an area of waveform memory to another area of waveform memory.
F1: FROM - Selects the address of the first point to copy.
F2: LENG - Selects the length (number of points) of the waveform to copy.
F3: TO - Selects the destination address where the first point is copied.
F4: EXEC - Prompts you to confirm whether to copy. Press NO to abort copying, YES to copy.
F5: PREV - Returns to previous menu.
Clear Function. Clears (sets the data values to zero) either a section of or all of waveform memory.
F1: FROM - Selects the address of the first point to clear.
F2: TO - Selects the address of the last point to clear.
F3: ALL - Clears the whole waveform memory. Equivalent to selecting from 1 to 4,000,000.
F4: EXEC - Prompts you to confirm whether to clear. Press NO to abort clearing, YES to clear.
F5: PREV - Returns to previous menu.