B&K Precision 4079 - Manual - Manual (Page 77)

71
Syntax: :ARBitrary:COPY<ws><start>,<length>,<destination>
Example: :ARB:COPY 1,1000,1001
Considerations:
1) The destination range cannot overlap with protected memory.
2) The destination range cannot overlap with the source range.
3) The destination end address may not exceed the maximum address:
Destination address + Length - 1 <= 131072
4.13.4.7 Memory Protection Range
:ARBitrary:PROTect [:RANGe] <start address>,<end address>
This command is used to define a range of arbitrary waveform memory to be write-protected. The protection is effective only
if the PROTect:STATe is ON.
Arguments
Type: Numeric.
Numeric Range: 1 to 4,000,000
Rounding: to integer value.
Command Type: Setting or Query
Setting
Syntax: :ARBitrary:PROTect[:RANGe]<ws><start>,<end>
Examples: :ARB:PROT 1,1E3
Query
Syntax: :ARBitrary:PROTect[:RANGe]?
Response: <protect start>,<protect end> in NR1 format.
4.13.4.8 Memory Protection State
:ARBitrary:PROTect:STATe <Boolean>
This command is used to enable or disable arbitrary waveform write-protection.
Arguments
Type: Boolean
Command Type: Setting or Query
Setting
Syntax: :ARBitrary:PROTect:STATe<ws>ON|1|OFF|0
Example: :ARB:PROT:STAT ON
Query
Syntax: :ARBitrary:PROTect:STATe?
Response: 0|1
4.13.4.9 Predefined Waveforms
:ARB:PRED <shape>,<start address>,<length>,<scale>
This command is used to load the waveform memory with a specific type of waveform.
Arguments
Shape
Type: Character