Luminex IS Version 2.3 - Manual (Page 108)

Luminex IS Software Manual Version 2.3
x
MAP Technology
98 PN 89-00002-00-110 Rev. B
Sample2
....
SampleM
StatN
StatN Header: Sample Location, Sample Name, Test1, Test2, ...,
TestN, Total Count, Notes
Sample1
Sample2
....
SampleM
Blank Lines
• There is one blank line between the Date and SN fields.
• There are four blank lines between the Operator field (or last
optional field) and Samples field.
• There is one blank line between the Samples and Results fields.
• There is one blank line between the Results field and the first
statistical data block.
• There is one blank line between each of the statistical data
blocks.
Field Definitions
Table D-1 Field Definitions
Field Name Field Value Description
Program, "value"<,CC> The name of the Luminex application that created the
Output.CSV file. If the file is generated by a non-US operating
system, the country code (in hex) is appended.
Build, "value” The version of the Luminex application that created the
Output.CSV file.
Date, "date", "time” The date & time that the Output.CSV file was created. This
field is not related to batch execution time. Note that the date
and time values are separated into distinct, adjacent fields
("Date","04/14/2003","02:46:45 PM") to maintain compatibility
with previous versions of software.
SN, "value” The serial number of the Luminex 100 device with which the
batch was executed.
Session, "value” The name of the batch. The term Session was used here to
maintain compatibility with previous versions of software.
Limited to 30 characters.
Operator, "value” The name contained in the Current User field on the General
tab of the Options dialog in the Luminex 100 IS software.
TemplateID, "value” (Optional) The database ID that is unique to the template
used to create the batch.