Luminex IS Version 2.3 - Manual (Page 18)

Luminex IS Software Manual for Version 2.3
x
MAP Technology
8 PN 89-00002-00-110 Rev. B
Maintenance Tab Use the Maintenance tab to perform maintenance, XYP, daily
startup, calibration, and verification commands to maintain your
system and keep it in optimal working order.
Figure 7 Maintenance Tab
See the Commands section starting on page 28 for detailed
information about these commands:
• Warmup
• Prime
• Backflush
• Alcohol Flush
• Sanitize
• Wash
• Drain
• Soak
• Self Diagnostics
• Calibration Commands: CAL 1, CAL2, CON 1, CON2, New
CAL target and New CON target
• Sample Probe Down
• Eject/Retract