Luminex IS Version 2.3 User Manual

Page 88

background image

Luminex IS Software Manual for Version 2.3


MAP Technology


PN 89-00002-00-110 Rev. B

Figure 52 Graph Menu Items

Enable Automatic


You can configure the system to automatically start analysis (data
reduction) immediately following batch acquisition. If you disable
the Auto-start Analysis feature, you must select Analysis from the
Home tab or toolbar to analyze a batch. Note that the Auto-start
Analysis feature is disabled when processing a multi-batch.

To ensure that calculated data is exported to the output.csv file, you
should not select both Auto-Start Analysis and the Auto Export
Batches checkbox on the Data Export tab of the Options dialog box.
Also note that Analysis and data reduction are synonymous terms.


To enable automatic analysis:

1. On the Tools menu, click Options, then click on the General

tab. See Figure 53.

Figure 53 Options Dialog Box—Select Auto-start Analysis

2. Click the Auto-Start Analysis checkbox, then click OK. When

the system completes the batch acquisition, it will automatically
begin analyzing data.