Luminex IS Version 2.3 - Manual (Page 27)

x
MAP Technology Luminex 2.3 Software
PN 89-00002-00-110 Rev. B 17
The Status Bar displays status information as the software processes
commands. Table 4 shows the typical messages that appear in the
Device Status Indicates the current process of or warning about the
Luminex analyzer
Green Running or standby
Yellow Busy, pressurizing, sheath is empty, or warming
up
Red Not ready or disconnected
Device
Activity Indicates the activity that the Luminex analyzer is
performing. Note: The device activity has no color code.
• Idling: waiting for a command
• Aspirating: drawing in sample
• Collecting Data: collecting data
• Sanitizing: sanitizing the instrument
• Washing: washing the sample line
• Priming: priming the instrument
• Calibrating: calibrating the instrument
• Canceling: canceling a command
• Backflushing: backflushing the instrument
• Draining: draining the instrument
• Warming Up: warming up the instrument
• Verifying: verifying calibration
• Soaking: soaking the probe
• Adjusting sample probe
• Self Diagnosing: performing self-diagnostic
routine
Laser Status Laser temperature and readiness status
Green Lasers warmed up
Yellow Warmup timer countdown in seconds from 1800
Red Lasers off
Total Events/
Second Number of total bead events detected per second
Region
Events/
Second Number of bead events detected per second that are
classified in a region
Table 3. Status Bar Color Coding (Continued)
Category Color Indicates