Luminex IS Version 2.3 - Manual (Page 93)

x
MAP Technology Luminex 2.3 Software
PN 89-00002-00-110 Rev. B 83
1. Click Print Report. The Report Selection dialog box opens.
Figure 57 Report Selection Dialog Box
2. Select the type of report that you want to print and click Next.
For the Analyte, Clinical Patient, and Batch Summary Reports,
the Batch Selection dialog box opens. Select the batch to print.
See Figure 58. For the Quality Control, Maintenance, Calibration
Trend, and System Control Trend Reports, a dialog box related to
the specific report opens. The system information may vary
depending on the type of report you select.
Figure 58 Batch Selection Dialog Box
3. Enter the information (in this example, a patient report) and click
Next. Another information dialog box opens. Enter specific
information for the type of report the system is compiling.
Figure 59 shows a Patient Selection example.