Luminex IS Version 2.3 - Manual (Page 28)

Luminex IS Software Manual for Version 2.3
x
MAP Technology
18 PN 89-00002-00-110 Rev. B
status bar. Additionally, information displays as text on the
Diagnostics tab.
Table 4. Status Bar
Communication Message Details
Status Bar
Color
Message Indicates
Green Idle Waiting to process the next
command.
Standby The Luminex analyzer is ready
and waiting to perform a
command.
Yellow Connecting The software is attempting to
connect to the instrument.
Processing The instrument is communicating
with the software as it processes
commands.
Pausing The instrument has stopped
processing the list of commands,
but finishing the active command.
Paused The software stopped processing
the list of commands. A “resume”
function becomes available to
change the state back to
“processing.”
Busy The instrument is processing a
maintenance command.
Red Disconnected The software has not yet
attempted to connect or fails to
connect to the instrument.
Locked Out Another application currently has
control of the instrument. The
software locks out as long as the
other application runs. To remove
the locked out status, close the
other application or wait until the
application completes.