Luminex IS Version 2.3 - Manual (Page 92)

Luminex IS Software Manual for Version 2.3
x
MAP Technology
82 PN 89-00002-00-110 Rev. B
‹
To create a new lot for use within a batch:
1. Click New Lot.
2. In the Update Lot Info dialog box, select Standard lot or
Control lot, then click Save to display the Choose Lot dialog
box. An asterisk identifies the selected lot. See Figure 55.
Running Reports and
Analyses
You can output data by printing reports and exporting batch data.
Report Types The Luminex IS 2.3 software can format your batch or multibatch
results in a variety of export formats and provide different types of
information in different types of reports.
Analyte Report - prints some or all of the samples grouped by the
test in a batch.
Clinical Patient Report - provides a breakdown of samples
according to the test analysis with that sample.
Patient Summary Report - prints all of the test results for a patient;
may include all tests or selected tests on the report.
Quality Control Report - used to track the trends of assay standards
and assay controls over a period of time.
Maintenance Report - provides a history of all maintenance
operations performed during the date range entered by the operator.
Batch Summary Report - prints batch information in a sample
versus test grid format; useful for an assay developer to quickly
reference a test result for a particular sample.
Calibration Trend Report - provides information about all
instrument calibration operations that occurred during the date range
entered by the operator.
System Control Trend Report - provides information about all
verification operations that were performed during the date range
entered by the operator.
Data Analysis Report - displays all the information available in the
Data Analysis window. You access this report through the Analysis
Window. For more information on printing this report, see page 85.
‹
To print a report from a batch or a specific time frame:
Install the printer before initiating the print command.