Luminex IS Version 2.3 - Manual (Page 109)

x
MAP Technology
PN 89-00002-00-110 Rev. B 99
TemplateName, "value” (Optional) The name of the template used to create the batch.
Limited to 30 characters.
TemplateVersion, "value” (Optional) The version of the template used to create the
batch. Limited to 10 characters.
TemplateDescription, "value” (Optional) The description of the template used to create the
batch. Limited to 200 characters.
TemplateDevelopingCompany,
"value” (Optional) The name of the company that developed the
template used to create the batch. Limited to 30 characters.
TemplateAuthor, "value” (Optional) The name of the person who created the template
used to create the batch. Limited to 30 characters.
SampleVolume, "value” (Optional) The sample volume defined in the template for
sample acquisitions. Units = microliters.
DDGate, "value” (Optional) The DD gate defined in the template for sample
acquisitions
SampleTimeout, "value” (Optional) The sample timeout defined in the template for
sample acquisitions. Units = seconds.
BatchAuthor, "value” (Optional) The name of the person who created the batch.
Limited to 30 characters.
BatchStartTime, "date time” (Optional) The date & time that the batch was started.
BatchStopTime, "date time” (Optional) The date & time that the batch was finished.
BatchDescription, "value” (Optional) The batch description. Limited to 200 characters.
BatchComment, "value” (Optional) Comment entered after the batch has run.
CALInfo: (Optional) Indicates the start of the CAL1 & CAL2 machine
calibration information logged just prior to and anytime during
batch acquisition
CONInfo: (Optional) Indicates the start of the CON1 & CON2 machine
verification information logged just prior to and anytime during
batch acquisition
AssayLotInfo: (Optional) Indicates the start of the Lot information for any
standards and/or controls associated with the batch
Samples,"num", MinEvents,"0” "Samples indicate the number of samples run in the batch.
The MinEvents field is unused and will always be zero. Note
that this field is adjacent to the Samples field
("Samples","28","Min Events","0"), rather than below it to
maintain compatibility with previous versions of software.
Min Events See Samples field above
Table D-1 Field Definitions (Continued)
Field Name Field Value Description