Luminex IS Version 2.3 - Manual (Page 73)

x
MAP Technology Luminex 2.3 Software
PN 89-00002-00-110 Rev. B 63
• Select Total Beads to continue analyzing until the selected
beads meet total beads value. Use Total Beads when you are
not using all of your selected bead sets in each well. Set the
total to desired high value.
6. Click the Bead Set tab. Select the checkboxes next to each
desired bead set for this batch. Click Select All to select all the
listed bead sets, or Deselect All to deselect all selected bead sets.
Figure 36 Options Dialog Box—Bead Set Tab
7. Edit the Events and Caption information for each bead set. Edit
the Default Events box to change the default value. Click Apply
to All to apply the default value to all bead sets. Table 8 lists
selection shortcuts.
Table 8. Bead Set Tab - Selection Shortcuts
Selected Column Select by clicking in the box.
Events Column Select desired field and right-click.
The value displayed in the “Default
Events” box updates the selected
field when you click “Apply Default”.
Caption Column If names are defined under this
column, you can right-click selected
rows and “Reset” back to normal
defaults.
Entire Column Select an entire column by clicking
the column heading (Selected,
Events, or Caption).