IDEC WindSRV - Manual (Page 130)

129
www.kepware.com
KEPServerEX5 Help
Note:
Every attempt is made to ensure backwards compatibility in the server so that projects created in older versions may
be loaded in newer versions. However, since new versions of the server and driver may have properties and
configurations that do not exist in older version, users may not be able to open or load a project created in a newer
version of the server in an older version.
'<server name>' Server Started
Error Type:
Information
Source:
Runtime
Possible Cause:
The server Runtime has started successfully.
Solution:
N/A.
'<server runtime>' successfully configured to run as a system service
Error Type:
Information
Possible Cause:
The server runtime process has been switched from "Interactive" to "System service" mode.
Solution:
None.
'<server runtime>' successfully removed from the service control manager database
Error Type:
Information
Possible Cause:
The server runtime process has been switched from "System Service" to "Interactive" mode.
Solution:
None.
Attempt to add DDE item '<item name>' failed
Error Type:
Error
Source:
Runtime
Possible Cause:
An attempt to add an item from a DDE client failed.
Solution:
1. If attempting to add an item dynamically to a tag group that is not supported in the server: Add dynamic tags to the
device level only.
2. If attempting to add an item dynamically but used the incorrect address syntax: Verify the syntax and try again.
3. If attempting to add an item that was not created as a static tag in the server: Add the tag in the server and then try