Runtime settings - host resolution – IDEC WindSRV User Manual
Page 17
16
www.kepware.com
KEPServerEX5 Help
are logged into it.
Descriptions of the parameters are as follows.
Preserve log on disk: This parameter enables the use of a disk-based log file. When enabled, all events in the
server will be maintained on disk from one run to the next. If disabled, the server's event logging system will be
recorded in memory and no disk log will be generated. When disabled, the event log contents will be emptied
each time the server is run.
Log file path: This parameter specifies where the log file will be stored its preservation is enabled.
Maximum number of events: This parameter determines the number of records the log system will hold before
the Log Full action comes into effect. The valid range is 100 to 30000 records. The default value is 1000 records.
If users attempt to change this parameter to a value that is less than the current number of records in the log,
they will receive a warning that log file truncation will occur.
Note: The Event Log System would be useless if there was no mechanism to protect its contents. If operators could
change these parameters or reset the log, the purpose would be lost. Utilize the User Manager to limit what functions
an operator can access.
Runtime Settings - Host Resolution
The Host Resolution tab is used to specify how the server manages Host Name Resolution with Ethernet drivers that
support the use of host names for connectivity.