Runtime settings - runtime options – IDEC WindSRV User Manual
Page 15
14
www.kepware.com
KEPServerEX5 Help
Descriptions of the parameters are as follows.
Process Mode: This parameter is used to specify whether the server will be running as System Service or
Interactive. By default, the server installs and runs as System Service. Changing this setting causes all clients,
both Configuration and process, to be disconnected and the server to be stopped and restarted.
High Priority: This parameter is used set the server process priority to high. The default setting is normal. When
checked, this setting allows the server to have priority access to resources.
Note: Microsoft recommends against setting applications to a high priority as it can adversely affect other
applications running on the same PC.
Process Affinity: This parameter is used to specify which CPUs the server can be executed on when it is run on
PCs containing more than one.
Runtime Settings - Runtime Options
The Runtime Options tab is used to change settings in the project that's being executed in the Runtime.