IDEC WindSRV - Manual (Page 163)

Index 162
www.kepware.com
Device '<device name>' has been auto-demoted
135
Device '<device name>' has been auto-promoted
to determine if communications can be
re-established 135
Device Properties - Auto-Demotion 65
Device Properties - Ethernet Encapsulation 62
Device Properties - General 60
Device Properties - Timing 63
Dialing '<phone number>' on line '<modem
name>' 153
Dialing aborted on '<modem name>' 153
Dialing on line '<modem name>' cancelled by user
153
Duplicate Channel Wizard page ID '<ID number>'
detected 143
Dynamic Tags 67
- E -
Error Descriptions 125
Error importing CSV tag record '<record number>':
'<tag name>' is not a valid tag group name 144
Error importing CSV tag record '<record number>':
Missing address 144
Error importing CSV tag record '<record number>':
Tag or group name exceeds 256 characters
145
Error importing CSV tag record '<record
number>':'<tag name>' is not a valid tag name
144
Event Log Display 101
Event Log Page Setup 101
- F -
Failed to enable iFIX PDB support for this server
[OS Error = n] 160
Failed to open modem line '<modem name>'
[TAPI error] 154
Failed to reset channel diagnostics 145
Failed to retrieve runtime project 145
Failed to upload project XML 135
FastDDE & Suitelink Options 107
- G -
General Operation System Error Messages 151
- H -
Hardware error on line '<modem name>' 154
How Do I... 116
How To... Create and Use an Alias 118
How To... Optimize the Server Project 121
How To... Resolve Comm Issues When the
DNS/DHCP Device Connected to the Server is
Power Cycled 125
How To... Use an Alias to Optimize a Project
120
How To... Use Dynamic Tag Addressing 117
How To... Use Ethernet Encapsulation 123
How To...Process Array Data 117
How To...Select the Correct Network Cable 122
How To...Use DDE with the Server 116
How To...Use NetDDE Across a Network 117
- I -
iFIX Error Messages 159
iFIX PDB Options 108
iFIX Signal Conditioning Options 110
iFIX:Unable to read <tag name> on device
<Channel Name/Device Name> 160
Incoming call detected on line '<modem name>'
154
Introduction 6
Invalid Ethernet encapsulation IP '<IP address>'
145
Invalid or missing modem configuration on channel
'<channel name'_ substituting '<modem>' 146
Invalid XML document '<XML name>' 146
- K -
KEPServerEX 6
- L -
Line '<modem name>' connected 154
Line '<modem name>' connected at '<baud rate>'
baud 155
Line '<modem name>' disconnected 155
Line '<modem name>' is already in use 155
Line dropped at remote site on '<modem name>'
155