IDEC WindSRV - Manual (Page 143)

142
www.kepware.com
KEPServerEX5 Help
'<driver name>' device driver unloaded from memory
Error Type:
Information
Source:
Configuration
Possible Cause:
The driver was unloaded from the server's memory space because it was no longer needed.
Solution
N/A.
'<driver name>' device driver was not found or could not be loaded
Error Type:
Error
Source:
Configuration
Possible Cause:
An attempt was made to load a project with a channel using the specified driver which could not be found or loaded.
1. If the project has been moved from one PC to another, the required drivers may have not been installed yet.
2. The specified driver may have been removed from the installed server.
3. The specified driver may be the wrong version for the installed server version.
Solution:
1. Re-run the server install and add the required drivers.
2. Re-run the server install and re-install the specified drivers.
3. Ensure that a driver has not been placed in the installed server directory (which is out of sync with the server
version).
'<driver name>' driver does not currently support XML persistence
Error Type:
Warning
Source:
Configuration
Possible Cause:
The specified driver does not support XML formatting.
Solution:
1. Save the project in .opf format.
'<plug-in>' plug-in was not found or could not be loaded
Error Type:
Error
Source:
Configuration
Possible Cause:
The server project being loaded is using a plug-in that cannot be found.