Server configuration error messages, Device name>' device driver loaded successfully – IDEC WindSRV User Manual
Page 142
141
www.kepware.com
KEPServerEX5 Help
Server Configuration Error Messages
The following error/warning messages may be generated. Click on the link for a description of the message.
Server Configuration Error Messages
'<device name>' device driver loaded successfully
'<driver name>' device driver unloaded from memory
'<driver name>' device driver was not found or could not be loaded
'<driver name>' driver does not currently support XML persistence
'<plug-in>' plug-in was not found or could not be loaded
A client application has '<enabled/disabled>' auto-demotion on device '<device name>'
Closing project '<project name>'
Created backup of project '<project name>' to '<file location>'
Duplicate Channel Wizard page ID '<ID number>' detected
Error importing CSV tag record '<record number>': '<tag name>' is not a valid tag group name
Error importing CSV tag record '<record number>': '<tag name>' is not a valid tag name
Error importing CSV tag record '<record number>': Missing address
Error importing CSV tag record '<record number>': Tag or group name exceeds 256 characters
Failed to reset channel diagnostics
Failed to retrieve Runtime project
Invalid Ethernet encapsulation IP '<IP address>'
Invalid or missing Modem Configuration on channel '<channel name', substituting '<modem>'
Invalid XML document '<XML name>'
Maximum channel count exceeded for the lite version '<driver name>' driver license
Maximum device count exceeded for the lite version '<driver name>' driver license
Maximum Runtime tag count exceeded for the lite version '<driver name>' driver license
Modem initialization failed on channel '<channel name>'
Opening project '<project name>'
Required schema file '<schema name>' not found
Unable to add channel due to driver-level failure
Unable to add device due to driver-level failure
Unable to backup project file to '<file name/location>'
Unable to backup project file to '<file path>'
Unable to launch OPC Quick Client [Path: '<path>' OS Error: '<error>']
Unable to load driver DLL '<driver name>'
Unable to use network adapter '<adapter>' on channel '<channel name>'. Using default network adapter
Validation error on '<tag name>': Invalid scaling parameters
'<device name>' device driver loaded successfully
Error Type:
Warning
Possible Cause:
The Configuration was able to successfully load the driver into its workspace.
Solution:
N/A.