IDEC WindSRV User Manual
Page 77
76
www.kepware.com
KEPServerEX5 Help
New Channel by Edit | Add Channel
New Channel by Context Menu
2. For simplicity, leave the channel name "Channel1."
3. Select the communications driver that will be applied to this channel. For this example, choose the Simulator
driver from the driver selection drop-down menu.
Note: For this driver, the Next dialog is the Channel Summary. In other applications, there will be additional dialog
pages that allow the configuration of parameters such as communications port, baud rate and parity.
Thus, while not used by the Simulator driver, the following figure demonstrates the communications dialog that is
common to all drivers that use the serial port.
4. To complete the addition of the channel, click Next | Finish.