IDEC WindSRV - Manual (Page 32)

31
www.kepware.com
KEPServerEX5 Help
The _Statistics branch found under the Channel branch will only appear when diagnostics are enabled for the channel.
In order to reference a Diagnostics Tag from a DDE application given the above example and the DDE defaults, the link
would appear as follows:
=
<DDE service name> |_ddedata!Channel1._Statistics._SuccessfulReads
The values of the Diagnostics Tag can also be viewed directly in the server by using the
Channel Diagnostics window.
If "Enable Diagnostics" has been selected under Channel Properties, right-click on that channel and then select
Diagnostics.
See Also:
System Tags and Property Tags .
Note: Modem Tags are described in the topics under Modem Support.
Modem Tags
The following tags are created automatically for the channel when modem use is selected.
Syntax Example: <Channel Name>.<Device Name>._Modem._Dial
Supported Modem Tag Names
Tag Name Description Access
_Dial
Writing any value to this tag initiates
dialing of the current PhoneNumber.
The Write is ignored unless the
current Status is 3 (Idle). An error is
reported if the is current phone
number has not been initialized.
Read/Write