IDEC WindSRV - Manual (Page 153)

152
www.kepware.com
KEPServerEX5 Help
Line dropped at remote site on '<modem name>'
Modem line closed: '<modem name>'
Modem line opened: '<modem name>'
Modem to Modem DCE: '<connection parameters>'
MODEMSETTINGS unavailable
No comm handle provided on connect for line '<modem name>'
No dial tone on '<modem name>'
Remote line is busy on '<modem name>'
Remote line is not answering on '<modem name>'
TAPI configuration has changed, reinitializing...
TAPI line initialization failed: '<modem name>'
The phone number is invalid '<phone number>'
Unable to apply Modem Configuration on line '<modem name>'
Unable to dial on line '<modem name>'
Unable to start Net DDE
, Error control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Error control has been set in the Modem Configuration dialog.
Solution:
N/A.
, Forced error control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Forced Error control has been set in the Modem Configuration dialog
Solution:
N/A.
, Hardware flow control
Error Type:
Information
Source:
TAPI Manager
Possible Cause:
Hardware Flow control has been set in the Modem Configuration dialog.
Solution: