IDEC WindSRV - Manual (Page 95)

94
www.kepware.com
KEPServerEX5 Help
Note: Within an OPC client, the combination of channel name and device name would appear as ChannelName.
DeviceName.
New Device - Model
The Model parameter is used to select the device model associated with the Device ID. The Model selection drop-down
menu's contents will vary depending on the chosen communication driver. If a driver does not support model selection,
this option will be unavailable. If the communication driver does support multiple models, users should match the model
selection to the physical device. If the device being used is not represented in the model drop-down list, select a model
that conforms closest to the target device. This can be determined from the specific driver's help documentation.
Note: Some drivers support an Open model, which allows users to communicate without knowing the target device's
specific details.