IDEC WindSRV - Manual (Page 133)

132
www.kepware.com
KEPServerEX5 Help
Source:
Runtime
Possible Cause:
The connected user has been idle for more than 15 minutes, and so the server automatically demoted them.
Solution:
When connected with the Configuration, do not leave the connection idle if in write access mode.
Configuration session assigned to '<user name>' promoted to Write Access
Error Type:
Information
Source:
Runtime
Possible Cause:
A user that was connected to the Runtime with Write Access has disconnected or demoted due to being idle.
Solution:
N/A.
Configuration session started by '<user name>'
Error Type:
Warning
Source
Runtime
Possible Cause:
A user on the local or remote PC has started a configuration session using a user login with Read/Write access to the
Runtime project.
Solution:
The first user to connect to the Runtime with a Configuration will have Read/Write access to the Runtime all other users
to connect will have Read Only access.
Configuration TCP/IP port number changed to '<port number>'
Error Type:
Information
Source:
Runtime
Possible Cause:
The port number that is used to connect the Configuration to the Runtime has been changed.
Solution:
The port was changed in the Administration settings. Change the port number in the Configuration Options in the
Runtime Connection Options to match the new Runtime port.
Data collection is '<enabled/disabled>' on device '<device name>'
Error Type: