IDEC WindSRV - Manual (Page 131)

130
www.kepware.com
KEPServerEX5 Help
adding the item from the client.
4. If attempting to add an item but used incorrect syntax: Correct the syntax and try again.
Attempt to add FastDDE/SuiteLink item '<tag name>' failed
Error Type:
Error
Source:
Runtime
Possible Cause:
1. The user attempted to add an item from a FastDDE/Suitelink client that was not a static tag in the server.
2. The user attempted to add an item from a FastDDE/Suitelink client that had incorrect syntax.
Solution:
1. Check the item syntax and correct if necessary.
2. Verify that the item is a valid address in the driver. If not, either use the correct address or remove the request.
3. Verify that the static tag exists in the project. If not, either add it or remove the request.
Attempt to add OPC Client item '<item name>' failed
Error Type:
Error
Source:
Runtime
Possible Cause:
An attempt to add an item from an OPC client failed.
Solution:
1. If attempting to add an item dynamically to a tag group that is not supported in the server: Add dynamic tags to the
device level only.
2. If attempting to add an item dynamically but used the incorrect address syntax: Verify the syntax and try again.
3. If attempting to add an item that was not created as a static tag in the server: Add the tag in the server and then try
adding the item from the client.
4. If attempting to add an item but used incorrect syntax: Correct the syntax and try again.
Attempting to automatically generate tags for device '<device name>'
Error Type:
Information
Source:
Runtime
Possible Cause:
The server is attempting to generate tags for the specified device.
Solution:
N/A.
Auto generation for tag '<tag name>' already exists and will not be overwritten
Error Type:
Warning