IDEC WindSRV - Manual (Page 93)

92
www.kepware.com
KEPServerEX5 Help
For Serial based drivers, the Communications dialog is used to set the Serial Port, Baud rate, Data bits, Parity, Stop bits
and RTS/DTR Flow Control.
Note: The dialog's additional options allow users to select and use dial-up Modem support or Ethernet Encapsulation for
connecting to devices via Serial to Ethernet terminal servers. For more information, refer to
Using a Modem in the
Server Project and Device Properties - Ethernet Encapsulation .
New Channel - Summary
The Channel Summary dialog allows users to review the selections they have made while defining the channel. If a
mistake is found upon review, users can simply click the Back button until the required dialog is displayed. After
making changes, users can click the Next button to return to the Summary page. Once satisified with the Channel
Summary, click Finish.