Yokogawa EJX430B - Manual (Page 93)

<11. General Specifications>
11-2
IM 01C27B01-01EN
Working Pressure Limits (Silicone oil)
Maximum Pressure Limits:
EJX110B
Capsule Pressure
F, L 16 MPa (2300 psi)
M, H, V 25 MPa (3600 psi)*
* 16 MPa for wetted parts material code H, M, T, A, D, and
B.
EJX310B
Capsule Pressure
L 10 kPa abs (2.95 inHg abs)
M 130 kPa abs (38 inHg abs)
A 3.5 MPa abs (500 psia)
B 16 MPa abs (2300 psia)
EJX430B
Capsule Pressure
H 500 kPa (2000 inH 2 O)
A 3.5 MPa (500 psi)
B 16 MPa (2300 psi)
Zero Adjustment Limits:
Zero can be fully elevated or suppressed, within
the lower and upper range limits of the capsule.
External Zero Adjustment:
External zero is continuously adjustable with
0.01% incremental resolution of span. Re-range
can be done locally using the digital indicator
with rangesetting switch.
Integral Indicator (LCD display):
5-digit numerical display, 6-digit unit display and
bar graph.
The indicator is configurable to display one
or up to three of the following variables
periodically.;
Differential pressure, static pressure,
temperature.
EMC Conformity Standards
EN61326-1 Class A, Table 2 (For use in
industrial locations), EN61326-2-3
R&TTE Conformity Standards
ETSI EN 300 328, ETSI EN 301 489-1,
ETSI EN 301 489-17, EN61010-1,
EN61010-2-030, EN62311
• Indoor/Outdoor use
Regulation Conformity of the Wireless Module
• FCC Approval
• IC Approval
Safety Requirement Standards
EN61010-1, EN61010-2-030
• Altitude of installation site:
Max. 2,000 m above sea level
• Installation category: I
(Anticipated transient overvoltage 330 V)
• Pollution degree: 2
• Indoor/Outdoor use
Degrees of Protection
IP66/IP67, NEMA4X
Connections:
Refer to “MODEL AND SUFFIX CODES.”
Wetted Parts Materials:
Diaphragm, Cover Flange, Process
Connector, Capsule Gasket, and Vent/Drain
Plug
Refer to “MODEL AND SUFFIX CODES.”
Process Connector Gasket
PTFE Teflon
Fluorinated rubber for option code N2 and N3
Non-wetted Parts Materials:
Bolting
ASTM-B7 carbon steel, 316L SST stainless
steel, or ASTM grade 660 stainless steel
Housing
Low copper cast aluminum alloy with
polyurethane, mint-green paint (Munsell
5.6BG 3.3/2.9 or its equivalent)
Name plate and tag
316 SST tag plate wired onto transmitter
Weight:
4.9 kg (10.8 lb) for wetted parts material code S
except for Measurement span code F without
battery pack, mounting bracket, and process
connector
5.8 kg (12.8 lb) for wetted parts material code
H, M, T, A, D and B or Measurement span code
F without battery pack, mounting bracket, and
process connector