Yokogawa YFGW410 - Manual (Page 105)

<D3. Constructing a Field Wireless System>
D3-44
IM 01W02D01-01EN
When the [Auto Paths] button is clicked, the window shown in Figure D3-45 appears in the main
window.
FD0345.ai
Figure D3-45 Auto Path Settings Window
The automatic path settings window appears. The transmission paths of IO field wireless devices
with selected check boxes are automatically recalculated. Recalculation calculates that distance
between the icons based on the positions of the device icons allocated on the backgroud image
area. The path to the closest routing device (Primary Router) and the path to the second clos-
est routing device (Secondary Router) are set as the new transmission paths. Based on these
results, the display of the paths on the backgroud image area is revised and the Primary Router
and Secondary Router of the field wireless device registered with the field wireless network are
automatically changed and configured.
When the automatic path settings window appears, the check boxes of all devices are selected
as default. Clear the check boxes of devices that do not require automatic calculation.
 Displaying and editing detailed information about devices and transmission
paths
After wireless devices are registered with the backgroud image area, devices and transmission
paths can be selected individually and their registration information displayed or deleted.
When right click over the icon of a wireless device allocated to the backgroud image area, a
menu to select the [Properties] and [Delete] options appears.
If the [Properties] option is selected, the window shown in Figure D3-32 appears. In the window
that appears here, the information is simply displayed. It cannot be changed or corrected.
The [Delete] option is selected, the icon and transmission path of the relevant device are deleted
from the backgroud image area. However, the device registration information itself is retained.
When right click over the transmission path displayed on the backgroud image area, a menu to
select the [Properties] and [Delete] options appears.
If the [Properties] option is selected, the window shown in Figure D3-46 appears.